Printed parts set for 1" (25.4mm Outside Diameter) linear rails. In the U.S. these do not fit 1" conduit this is for 1" OD stainless or DOM tubing.
Saves you ~100-150 hours of print time and 2.2Kg of filament buying these.
Includes parts for dual ends top and series builds.
-Colors scheme may vary-
Includes
QTY | Part Name | Infill | Color |
---|---|---|---|
Corner | |||
2 | Corner Bottom | 45%+ | B |
2 | Corner Bottom Mirrored | 45%+ | B |
2 | Corner Top | 45%+ | A |
2 | Corner Top Mirrored | 45%+ | A |
2 | Lower Belt | 45%+ | A |
2 | Lower Belt Mirrored | 45%+ | A |
2 | Upper Belt | 45%+ | B |
2 | Upper Belt Mirrored | 45%+ | B |
4 | Corner Leg Lock | 45%+ | B |
4 | Feet | 45%+ | A |
2 | Wire Darryl | 45%+ | A |
4 | Stop Block (Dual only) | 45%+ | A |
Trucks | |||
2 | Truck | 45%+ | A |
2 | Truck Mirrored | 45%+ | A |
4 | Truck Clamp | 45%+ | B |
Z-Axis | |||
1 | Z Motor | 45%+ | A |
1 | Z Coupler | 45%+ | A |
2 | Nut Trap | 45%+ | A |
1 | Upper Tool Plate | 45%+ | A |
1 | Lower Tool Plate | 45%+ | A |
Center Assembly | |||
2 | Core Z Clamp 1 | 45%+ | A |
2 | Core Z Clamp 2 | 45%+ | A |
3 | Core Clamp | 45%+ | A |
1 | Core ClampY | 45%+ | A |
1 | Core | 70%/30%/70% | B |